Huastlink launches 5G multi-LAN port WIFI6 router with MTK7981 solution, which can save a Gigabit 8-port switch

Huastlink is currently testing the HC-G80 of the MTK7981 solution. The WiFi6 multi-LAN port router is almost completed internal testing and is expected to be officially launched in December 2023. The main application scenarios are commercial 5G applications, industrial 5G applications, and industrial Internet. applications, industrial Gigabit gateway applications and other high-end scenarios.

 

The following is a general introduction to the HC-G80 of Huastlink:

The HC-G80 router is based on a new ARM architecture embedded platform to meet the growing needs of mobile devices. Compatible with NSA/SA dual-mode, it works on all network types worldwide, meaning you can enjoy ultra-fast broadband.

Embedded OpenWrt system is used to support secondary development and meet the customization of various functions.

The 2+8-port Gigabit 5G router brings a new way to allow your project to easily access more devices, saving switch investment and unknown space and making it more reasonable

With 802.11ax (Wi-Fi 6) technology built into the router, a single 5G WiFi6 router provides greater wireless coverage and bandwidth. At the same time, 5G WiFi6 routers can also bring higher security and better network performance.

 

Hardware platform specifications

  1. Main control CPU processor: MT7981B ARM Cotext-A53 dual-core CPU, 1.3GHZ frequency
  2. WIFI chip: MT7976CN 802.11AX protocol wireless rate 3000M
  3. Memory: 1GB high-speed DDR
  4. Flash memory: 128MB SPI NAND FLSAH

 

Hardware interface specifications

  1. DC power supply interface: standard DC5.5*2.1MM interface (voltage: 9-54V)
  2. Terminal power supply interface: 2pin 3.81 interface (voltage: 9-54V)
  3. Network ports: 1 CONSOLE port 1 WAN port 8 LAN port
  4. SIM card: 2 standard SIM card plug-in slots
  5. USB interface: 1 USB 3.0 interface
  6. Buttons: 1 reset button

Built-in M2 and MINIPCIE interface (can be connected to 4G5G module)

 

WIFI wireless specifications

2.4G

Compatible with IEEE 802.11 b/g/n/ac/ax; supports 20MHz, 40MHz, modulation method 1024-QAM / OFDMA, uses 2T2R MU-MIMO antenna technology, and the maximum connection rate is up to 574Mbps.

5.8G

Compatible with IEEE 802.11 a/ac/ax, supports 20MHz, 40MHz, 80MHz, 160MHz modulation method 1024-QAM / OFDMA, using 2T3R MU-MIMO antenna technology, the maximum connection rate is up to 2400Mbps

 

Software

Adopt OpenWrt system to support secondary development